| |
InRow SC System 1 InRow SC 50Hz 1PH, 1 NetShelter SX
Rack 600mm, and Rear Containment
The In-row solution improves energy efficiency and cooling
ability in a number of ways. First, the room air is pulled
in through a filter at the rear of the unit, is cooled, and
is then distributed out the front of the unit to cool the
space. Air from outside the room is utilized for rejecting
heat for cooling by the building AC system. Removing and
neutralizing the heat from the hot aisle provides for a more
efficient return air path than placing the air conditioner
along the perimeter. The cold air is then supplied to the
area in front of the racks, exactly
where it is needed.
Product Specifications
 Output
-
Cooling Options - Air-Cooled, Self-contained
-
Compressor Type - Rotary
-
Air Discharge Patterns - Horizontal
-
Intake Air - Rear Return
-
Refrigerant - R410A
-
Refrigerant Charge - 3 pounds
-
Air Flow - 1200 CFM
-
Condensate Pump Capacity - 1.30 gal/hour
-
Amp Draw Nominal - 16A
-
Amp Draw In-Rush - 65
Input
- Input Power - 2390 Watts
- Input Frequency - 50 Hz
- Rack Height - 42U
- Input Connections - IEC 309 16A 2P+E
Documentation
InRow SC System 1 InRow SC 50Hz
© 2009
DataVox Inc. | All Rights Reserved |
Terms of Use and Privacy Policy
713.881.5300 Main | 713.881.5353 Customer Service
Data Center Design and Installation |
| 
